5V 12A 8 Channels Battery Testing Equipment
Brief Introduction
STC-4008Tn-5V12A is a three range output current tester, 5mA-1A, 1A-6A, 6A-12A. The accuracy for current and voltage on these channels is ±0.05% FS. It is widely used for manufacturers, universities and labs. The flexibility of the 5V12A analyzer allows it to be used for a wide range of applications, such as materials research, quality control in manufacturing, research & development, battery and cell testing, super-capacitor testing, etc.
Features
● Multi ranges.
● Wide application.
● High accuracy, ±0.05% FS.
● Fast response time.
● Each channel is independent.
● Side air intake on the left / right side & eight test channels, the inventive heat-radiating system is practical and feasible and can increase heat-radiating efficiency and space utilizaion rate.
Technical Parameters
|
Input Power
|
AC220V±10% / 50Hz
|
|
Resolution
|
AD:16bit; DA:16bit
|
|
Input Resistance
|
≥1GΩ
|
|
Input Power
|
826W
|
|
Channel Features
|
Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure
|
|
Channel Control Mode
|
Independent Control
|
| Voltage |
Per Channel Control Voltage Range
|
25mV~5V
|
|
Minimum discharge voltage
|
Upper and lower clamp discharge to 1V, 2m cables to 1.5V
|
|
Accuracy
|
± 0.05% of FS
|
|
Stability
|
± 0.05% of FS
|
|
Current
|
Per Channel Current Range
|
Range 1: 5mA~1A ,
Range 2: 1A~6A,
Range 3: 6A~12A
|
|
Constant current cut-off current
|
Range 1: 2mA,
Range 2: 12mA ,
Range 3: 24mA
|
|
Accuracy
|
± 0.05% of FS
|
|
Stability
|
± 0.05% of FS
|
|
Power
|
Per Channel Output Power
|
60W
|
|
Stability
|
± 0.1% of FS
|
|
Time
|
Current Response Time
|
<1ms (0-Full Range)
|
|
Step Time Range
|
≤(365*24 )hour/step, Time Form Support 00:00:00.000(h,min,s.ms)
|
|
Data Recording
|
Record Condition
|
Time△t:100ms
|
|
Voltage△U: 10mV
|
|
Current△I:Range 1: 2mA,
Range 2: 12mA ,
Range 3: 24mA
|
|
Record Frequency
|
10Hz
|
|
Charge
|
Charge Mode
|
Constant Current Charge,Constant Voltage Charge, Constant Current and Constant Voltage Charge, Constant Power Charge
|
|
End Conditon
|
Voltage, Current, Relative Time, Capacity
|
|
Discharge
|
Discharge Mode
|
Constant Current Discharge,Constant Power Discharge, Constant Resistance Discharge
|
|
End Condition
|
Voltage, Current, Relative Time, Capacity
|
|
Pulse Test
|
Charge
|
Constant Current Charge, Constant Power Charge
|
|
Discharge
|
Constant Current Discharge, Constant Power Discharge
|
|
Minimum Pulse Width
|
500ms
|
|
Pulse Number
|
32 diffirent pulse for a single step
|
|
Automated Switch
|
Automated switch from charge to discharge for each pulse
|
|
Cycle
|
Loop Measure Range
|
1~65535 times
|
|
Max Steps Per Loop
|
254
|
|
Nested Loop
|
Nested loop Function, Max support 3 Layers
|
|
Protection
|
Power-down Data Protection
|
|
Off-line Testing Function
|
|
Setting Protection Condition,Setting Parameter: Low Voltage limit, Upper Voltage limit, Low Current limit, Upper Current limit, Delay Time, Anti-reverse Protection Model
|
|
Voltage and Current Testing Sample
|
4-wire connecting
|
|
Noise
|
<55dB
|
|
Database
|
MySQL Database
|
|
A Means of Communication of Upper Machine
|
TCP/IP Protocol
|
|
Data Output
|
EXCEL 2003, 2010, TXT
|
|
Server disk configuration
|
500GB
|
|
Communication Interface
|
Internet Access
|
|
Server Operating System
|
Windows 7
|
|
Per Unit Main Channels No.
|
8
|
|
Clamp
|
Alligator clamp, Polymer clamp, Ring clamp optional
|
|
Dimension
|
L483 * W404 * H130mm
|
Warranty
1 year warranty with lifetime support. Man-made damage is not covered.
FAQ
1. Are you a manufacturer?
A: Yes, our factory is located in Shenzhen, China.
We have more than 10 year experience for manufacturing battery lab research equipment. We own a professional R&D department.
2. Do you accept customized product?
A: Yes. Most of our products can be customized to meet different requirements.
3. Will you provide test video before dispatch?
A: Yes, we take test video for every equipment before dispatch, which will display how to use it.
4. Can you offer overseas installation service?
A: Yes, we can dispatch professional engineer for on-site installation service.
|
|
5V 12A 8 Channels Battery Testing Equipment Images
|
